The amplifier delivers 2x200W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 400W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.

• Power 8 Ohms, Both Channels Driven 2 x 100 W
• Power 8 Ohms Bridged 1 x 400 W
• Power 4 Ohms, Both Channels Driven 2 x 200 W
• Power 100 V 1 x 400 W
• Power 70 V 1 x 400 W

• Amplifier Channels 2
• Output Circuitry Class D
• Frequency Response 20 Hz-30 kHz (+0 – 0.5 dB)
• Sensitivity 1.38 V (5 dBu)
• Voltage gain 30.4 dB
• Damping Factor > 1000 (8 Ω load, 1 kHz and below)
• Controls Power On/Off, Gain Pots
• Cooling Side-Right-to-Left
• Amplifier Protections Short Circuit, DC Output, Temperature, Over/Under Voltage
• LED Indicators On-Protect-Standby, Signal-Clip
• Audio Signal Input Connector Terminal Block
• Speaker Output Connector Terminal Block
• Current Draw 230 V / 115 V 1.5 A / 3.0 A

• Dimensions ( H x W x D )
• 44 x 483 x 208 mm
• 1,7 x 19,0 x 8,2 in
• Net Weight 2,7 kg ( 5,9 lb )

• Carton Dimensions ( H x W x D )
• 130 x 525 x 315 mm
• 5,1 x 20,7 x 12,4 in
• Shipping Weight 3,7 kg ( 8,1 lb )