Skip to product information
- DESCRIPTION
- SPECIFICATIONS
DESCRIPTION
INTEGRAL-A404 is a quad channel, 1U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings.
The amplifier delivers 4x100W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x200W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.
The amplifier delivers 4x100W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x200W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.
SPECIFICATIONS
Output Power Ratings
- Power 8 Ohms, Both Channels Driven 4 x 50 W
- Power 8 Ohms Bridged 2 x 200 W
- Power 4 Ohms, Both Channels Driven 4 x 100 W
- Power 100 V 2 x 200 W
- Power 70 V 2 x 200 W
Electronics and Connectors
- Amplifier Channels 4
- Output Circuitry Class D
- Frequency Response 20 Hz-30 kHz (+0 – 0.5 dB)
- Sensitivity 1.38 V (5 dBu)
- Voltage gain 30.4 dB
- Damping Factor > 1000 (8 Ω load, 1 kHz and below)
- Controls Power On/Off, Gain Pots
- Cooling Side-Right-to-Left
- Amplifier Protections
- Short Circuit, DC Output, Temperature, Over/Under Voltage
- LED Indicators On-Protect-Standby, Signal-Clip
- Audio Signal Input Connector Terminal Block
- Speaker Output Connector Terminal Block
- Current Draw 230 V / 115 V 1.5 A / 3.0 A
Dimensions-Weight
- Dimensions ( H x W x D )
- 44 x 483 x 208 mm
- 1,7 x 19,0 x 8,2 in
- Net Weight 2,9 kg ( 6,4 lb )
Shipping
- Carton Dimensions ( H x W x D )
- 130 x 525 x 315 mm
- 5,1 x 20,7 x 12,4 in
- Shipping Weight 3,5 kg ( 7,6 lb )
DAS AUDIO INTEGRAL-A404 100W 4 Ch. Amplifier
FINANCE WITH SYNCHRONY:
$1,679.00
Adding product to your cart
SPECIFICATIONS:
-
SKU:
INTEGRAL-A404
- Vendor:
- Product type:
- DESCRIPTION
- SPECIFICATIONS
DESCRIPTION
INTEGRAL-A404 is a quad channel, 1U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings.
The amplifier delivers 4x100W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x200W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.
The amplifier delivers 4x100W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x200W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.
SPECIFICATIONS
Output Power Ratings
- Power 8 Ohms, Both Channels Driven 4 x 50 W
- Power 8 Ohms Bridged 2 x 200 W
- Power 4 Ohms, Both Channels Driven 4 x 100 W
- Power 100 V 2 x 200 W
- Power 70 V 2 x 200 W
Electronics and Connectors
- Amplifier Channels 4
- Output Circuitry Class D
- Frequency Response 20 Hz-30 kHz (+0 – 0.5 dB)
- Sensitivity 1.38 V (5 dBu)
- Voltage gain 30.4 dB
- Damping Factor > 1000 (8 Ω load, 1 kHz and below)
- Controls Power On/Off, Gain Pots
- Cooling Side-Right-to-Left
- Amplifier Protections
- Short Circuit, DC Output, Temperature, Over/Under Voltage
- LED Indicators On-Protect-Standby, Signal-Clip
- Audio Signal Input Connector Terminal Block
- Speaker Output Connector Terminal Block
- Current Draw 230 V / 115 V 1.5 A / 3.0 A
Dimensions-Weight
- Dimensions ( H x W x D )
- 44 x 483 x 208 mm
- 1,7 x 19,0 x 8,2 in
- Net Weight 2,9 kg ( 6,4 lb )
Shipping
- Carton Dimensions ( H x W x D )
- 130 x 525 x 315 mm
- 5,1 x 20,7 x 12,4 in
- Shipping Weight 3,5 kg ( 7,6 lb )
DAS AUDIO INTEGRAL-A404 100W 4 Ch. Amplifier
Ask a Question
Recently Viewed
Top-notch support
Wanting support anywhere can be tough, but at Hermes, we take pleasure in helping out our customers!
Secure payments
Hermes uses the same security measures as paying with your physical Credit or Debit Card!
Free Shipping
Free shipping on qualifying orders $250 or more!
Satisfied or refunded
Whether satisfied with your purchase, wanting a refund, or for any other inquiries, please give us a call.
Invalid Password
Enter