The Danley Sound Labs SM80 molded synergy horn is a compact pole mountable box that is capable of producing SPL and clarity like never before seen in a box this size. Just 2 SM80s will cover the mid-range and highs for most venues!
*THIS MODEL IS THE AQUA TIGHT LOUDSPEAKER VERSION*
THE SYNERGY HORN
The Synergy Horn successfully couples the radiation from multiple drivers into a single horn to yield the effective performance of a single horn/driver system with high sensitivity excellent directivity control and a wide frequency response.
Aqua Tight Coating
Aqua Tight Coating includes full two layer fiberglass finish for maximum moisture resistance as well as a special polyurea coat bonded to the fiberglass exterior & two topcoat layers of UV resistant color stabilizer. It also includes all stainless steel exterior fasteners, an acoustically transparent moisture barrier to the grille, waterproofing the driver cones and sealant for the input plate, handles or cabinet fixtures. The finish also includes a powder coated stainless steel grille, sealed, waterproof cable leads (12’ length standard), and fully caulked all external joints (except for the “weep” opening at the bottom of the grille).
If a repair is to be made on a loudspeaker with “AT” finish, a few steps must be taken to insure the speaker remains water resistant in future usage. The caulking must be removed to free the grill and driver access panels. Once the repair is finalized, the bolts must be coated with silicon and the caulk must be replaced on all panels that have been removed.
- Coverage Pattern: 80° Conical
- Operating frequency range: 140Hz-19kHz +/- 3dB; 110Hz-22kHz - 10dB
- Continuous output: 128 dB SPL
- Peak output: 134 dB SPL
- Sensitivity: 102 dB SPL
- Driver complement: 1 x 12" coaxial
- Dimensions: 25.5 x 24 x 12.75 inches
- Weight: 65 lbs
- Rated Impedance: 8 Ohms
- Power Rating: 400 Watts Cont.; 1600 Watts Peak